5th Gen FAQ (Please read before posting)

[h22accord94]

Credit to Brakiss & vaginactrl for some of the information listed here.

!!!!!!!!!!!!!!!!!!!THIS FAQ IS CURRENTLY UNDER GOING CHANGES AND ADDITIONS!!!!!!!!!!!!

-------GENERAL FAQ-------

Q) What engine do I have in my 94-97 Accord?
A) Reference list below

F22B1 (EX Model) - 2.2L 4-Cylinder
F22B2 (DX/LX Models) - 2.2L 4-Cylinder
C27A (LX/EX Models) - 2.7L v6

Q) How much torque/horsepower do stock 94-97 Accords have?
A) Reference list below

DX 4cyl Sedan Horsepower - 130 @ 5200 RPM
DX 4cyl Sedan Torque - 144 @ 4000 RPM

LX 4cyl Coupe Horsepower - 130 @ 5200 RPM
LX 4cyl Coupe Torque - 144 @ 4000 RPM

LX 4cyl Sedan Horsepower - 130 @ 5200 RPM
LX 4cyl Sedan Torque - 144 @ 4000 RPM

EX 4cyl Sedan Horsepower - 140 @ ???? RPM
EX 4cyl Sedan Torque - 190 @ ???? RPM

EX 4cyl Coupe Horsepower - 140 @ ???? RPM
EX 4cyl Coupe Torque - 190 @ ???? RPM

LX v6 Sedan Horsepower - 170 @ 5500 RPM
LX v6 Sedan Torque - 178 @ 4000 RPM

EX v6 Sedan Horsepower - 170 @ 5500 RPM
EX v6 Sedan Torque - 178 @ 4000 RPM

Q) What's my compression ratio?
A) Reference list below

DX (F22B2) - 8.8:1
LX & EX (F22B1) - 9.3:1
LX & EX v6 (C27A) - 9.0:1

Q) What's my engines displacement?
A) Reference list below

DX & LX 4cyl (F22B2) - 134.2 Cubic Inches
EX 4cyl (F22B1) - 134.2 Cubic Inches
LX & EX v6 (C27A) - 164.8 Cubic Inches

Q) What's my engines Bore & Stroke?
A) Reference list below

F22B1 4Cyl - Bore × Stroke: 85.0 × 95.0 mm
F22B2 4Cyl - Bore × Stroke: 85.0 × 95.0 mm
C27A v6 - Bore x stroke 87mm x 75mm

Q) What's my engines firing order?
A) Reference list below

4cyl - 1,3,4,2
v6 - 1,4,2,5,3,6

Q) What RPM's should my engine idle?
A) Reference list below

4cyl - 650rpm to 750rpm
v6 - 630rpm to 730rpm

Q) What are my engine fluid capacities?
A) Reference list below

F22B2 Engine fluid capacities:
Oil - 4.0 US qt (including filter) 3.5 US qt (without filter)
Manual Transmission oil (API Service SG, SH, SJ, SAE 10W-30) - 2.0 US qt
Automatic Transmission oil (Honda ATF-Z1) - 3.4 US qt
Coolant (Manual) - .85 US Gallons
Coolant (Automatic) - .82 US Gallons

F22B1 Engine fluid capacities:
Oil - 4.3 US qt (including filter) 4.0 US qt (without filter)
Manual Transmission oil (API Service SG, SH, SJ, SAE 10W-30) - 2.0 US qt
Automatic Transmission oil (Honda ATF-Z1) - 3.4 US qt
Coolant (Manual) - .85 US Gallons
Coolant (Automatic) - .82 US Gallons

C27A Engine fluid capacities:
Oil - 4.6 US qt (with filter) 4.0 US qts (without filter)
Automatic transmission oil (Honda ATF-Z1) - 7.5 total US qts, 2.7 US qts change
Coolant (Auto only) - 2.01 US qts


Q) What type of spark plug does my car have & what should the gap be?
A) Reference list below
NGK ZFR5F-11
Nippondenso KJ16CR-L11
Plug gap: 1.1mm (0.04 in) +/-.1mm

Q) How big is my fuel tank?
A) 17 US Gallons

Q) What about my air conditioner?
A) Reference list below

Refrigerant type - R-134A
Charge capacity (4cyl) - 21-22oz
Charge capacity (v6) - 550-600 grams (19-21oz)
Lubricant oil:
EX Models - Dn.S10X
DX/LX Models - ND-OIL8

Q) What size tires and rims came stock on my 94-97 accord?
A) Reference list below

DX/LX Models - 14's - P185/70R14 90S
EX - 15's - P195/60R15 89H
LX/EX v6 Models - 15's - 205/60r15 91V (29psi)

Q) What's my accords lug pattern?
A) Reference list below

4Cyl - 4x114.3
v6 - 5x114.3

Q) Where can I get the Wings West W Type Kit online ?
A) www.ebay.com www.import-trader.com www.groupbuycenter.com. Also try searching google it's your best friend.

Q) How are lip kits held on 5th gen's?
A) Most are double sided tape and self taping screws.

Q) What companys make lips kits for our cars?
A) Greddy, Wings West, Xenon, Stillen, etc..

Q) Will 96/97 lip fit on 94/95 bumper? and vise versa?
A) No, not with out modification.

Q) Where can I get a Type R Grill?
A) www.eBay.com

Q) How is the light output on 5th gen Projector headlamps?
A) Aftermarket projector headlamps in general have very poor light output. There is an alternative to aftermarket projectors which is called "retrofitting". Please check out our sponsor http://www.customlightz.com for retrofits. The poor light output includes the "halo or angle eye" headlights.

Q) How's the light output on JDM style headlamps?
A) Very comparible of OEM headlamps.

Q) Do JDM style headlamps fog up?
A) Some people have had problems with their corners fogging up. A simple fix is to ensure the headlamps are sealed properly by using what is called "buytl rubber". If you cannot find buytl rubber silicone will do the job. Just be careful with silicone as the fumes can also cause your lens to fog.

Q) Where can I get JDM style head lights ?
A) www.groupbuycenter.com www.ebay.com www.autodynamic.com

Q) Will 19 inch rims fit on my car ?
A) Yes

Q) I'm in the market for an exhaust do you have any suggestions?
A) Greddy, Apexi WS or Magnaflow

Q) I'm in the market for an air intake do you have any suggestions?
A) AEM & Injen. Please note there are many intake manufactures of air intakes on the market alot of your decision will be based on personal preferences as many are the same minus the brand.

Q) Is there a supercharger available for our cars like 6th gen accords have?
A) No. There is however turbo kits available.

Q) Where can I get a DC Sports header?
A) www.groupbuycenter.com www.ebay.com

Q) Are DX/LX headers interchangeable with EX headers?
A) No. Not without modifying them.

Q) I'm in the market for true coilovers do you have any suggestions?
A) Apexi WS (discontinued), Tanabe Sustec Pro's & Tein are just a few.

Q) I just bought a carbon fiber hood, do I need hood pins and will my factory latch work with the hood?
A) Yes. Hood pins are a must with any aftermarket light weight hoods to prevent blow up. Blow up is when the air under your hood eventualy collects to the point of forcing the hood open. Carbon fiber hoods are very subject to this due to their light weight and flexibility. On most carbon fiber hoods your hood latch should work with no problems.

Q) What about relocating the windshield washer nozzles on the carbon fiber hood?
A) You will need to drill the holes in the carbon fiber hood in order for the nozzles to fit.

Q) Do I need a camber kit?
A) Depends on how much you are lowered. In most cases if you have a drop of 1.5" or less you can get away without a camber kit. Anything over 1.5" you will need a camber kit to properly align your car.

Q) I have the JDM black housing headlights on my accord and i'm interested in getting HID's will they work in my JDM housings?
A) Yes. As long as you purchase a H4 bulb set.

Q) Will a f22b2 cold air intake or short ram intake fit on a f22b1?
A) Yes.

!!!!!!!!!!!!!!!!!!!THIS FAQ IS CURRENTLY UNDER GOING CHANGES AND ADDITIONS!!!!!!!!!!!!

[h22accord94]

Q.) How much of a drop are xxxx springs?
A.) NOTE: All of the the listed values are those given by the company that make the particular spring. The posted are for the 94-97 Honda accord 4 cyl excluding wagon

Eibach:
Pro-kit................................ 1.2
Sportline............................ 1.7/1.8

Intrax:
Street................................ 1.7
Super Sport....................... 2.5

Suspension Techinques:
Street................................ 1.0
Speed Tech........................ 2.0

Neuspeed:
Sport................................. 1.7
Race.................................. 2.0

Sprint:
LowStreet......................... 2.2
Extreme RX....................... 3.2

HKS:
Super Form....................... 1.2

Tanabe:
Super Down...................... 2.0

Q.) How much torque/horsepower do stock accords have

A.) I have a 1995 Honda Accord EX 5-speed

The horsepower for the DX/LX (f22b2) model is: 130 @ 5200 RPMs
The torque: 144 @ 4000 RPMs

The horsepower for the EX (f22b1) model is: 145 @ 5200 RPMs
The torque: 147 @ 4000 RPMs

Q.) How do i take the amber reflector out of my stock tails?
A.) 1. take off the tail lamp and unclip the yellow snaps on the side (you'll see)
2. get a set of needle nosed pliers to get in there
3. twist and pull
4. enjoy hard work's progress
5. do it again

Q.) Does the JDM black housing headlight from autodynamic or groupbuy fit my V6 accord?????
A.) With the JDM lenses - You have to cut your headlight bracket to make them fit. Just takes a little trimming, but they won't fit otherwise

Q.) What is the weight of my accord?
A.) 94-95 accord..
http://carpoint.msn.com/Vip/Specifi...Accord/1995.asp
96-97 accord..
http://carpoint.msn.com/Vip/Specifi...Accord/1997.asp

Q.) Whats the difference between autodynamic blackhousings and the stanley ones?
A.) There are two verson's currently avliable

1. The True Stanley verson (Prices range from 200 to 600 give or take)

2. The replicas (AKA Autodynamic or the Depo's average price as low as 200)

Q.) Why would I ever check for codes?
A.) Well if you ever have a light pop on when you are driving (I.E. check engine, SRS, or in my recent case ABS) this allows you to trouble shoot the problem on your own.
Engine Codes
ABS Codes

For 1994-97 accords:

(As printed in the haynes manual)





Trouble code Circuit or system Corrective action
CodeO Faulty ECM Check the ECM electrical connector. If no loose connectors are found, have the ECM diagnosed by a dealer service department.
Code-1 Oxygen sensor Check the oxygen sensor and circuit (see Section 4).
Codes 3 Manifold Absolute Pressure sensor Check the MAP sensor and circuit (see Section 4).
Code 4 Crankshaft Position sensor (CKP) Check the CKP sensor and circuit (see Section 4).
Code 6 Engine Coolant Temperature sensor (ECT) Check the ECT sensor and circuit (see Section 4).
Code 7 Throttle Position sensor (TP) Check the TP sensor and circuit (see Section 4).
Code8 Top Dead Center position sensor (TDC) Check the TDC sensor and circuit (see Section 4).
Code 9 Cylinder Position sensor (CYP) Check the CYP sensor and circuit (see Section 4).
Code 10 Intake Air Temperature sensor (IAT) Check the IAT sensor and circuit (see Section 4).
Code 12 Exhaust Gas Recirculation valve lift sensor Check the vacuum hoses, the EGR valve lift sensor and the EGR valve (see Section 6).
Code 13 Barometric Pressure sensor (BARO) The BARO sensor is built into the ECM, have the vehicle checked at a dealer service department.
Code 14 Idle Air Control valve (IAC) Check the IAC valve and system (see Chapter 4).
Code 15 Ignition output signal Check the ignition system (see Chapter 5).
Code 16 Fuel injector Check the fuel injection system and the fuel injectors (see Chapter 4).
Code 17 Vehicle Speed Sensor (VSS) Check the VSS and circuit (see Section 4).
Code 20 , Electronic load detector (ELD) Check the ELD system (see Section 8).
Code 21 Variable Valve Timing solenoid valve See Chapter 2A, VTEC solenoid checks. . -i,^,
Code 22 Variable Valve Timing pressure switch See Chapter 2A, VTEC pressure switch checks.
Code 30 A/T Fl signal A (automatic transaxle) Code 30 indicates a problem between the transmission control module and the ECM, have the vehicle checked at a dealer service department. ,g
Code 31 A/T Fl signal B (automatic transaxle) Code 31 indicates a problem between the transmission control module and the ECM, have the vehicle checked at a dealer service department. ,
Code 41 Oxygen sensor heater Check the heater for the proper voltage signal (see Section 4).
Code 43 Fuel supply system Check the fuel pressure/fuel pressure regulator (see Chapter 4). Also check the oxygen sensor (see Section 4).
Code 61 Oxygen sensor Check the front oxygen sensor, slow response detected (OBD-II).
Code 63 Oxygen sensor Check the rear oxygen sensor, voltage out-of-range detected (OBD-II).
Code 65 Oxygen sensor Check the rear oxygen sensor, circuit malfunction detected (OBD-II).
Code 67 Catalytic converter Check the catalytic converter, low efficiency detected (OBD-II).
Code 70 Automatic transaxle Problem detected with the automatic transaxle (OBD-II).
Codes 71 through 76 Cylinder missfire Cylinder missfire detected (OBD-II).
Code 80 EGR system Check the EGR system, insufficient EGR flow detected (OBD-II).
Code 86 Engine Coolant temperature sensor (ECT) Check the ECT sensor and circuit, circuit problem detected (OBD-II).
Code 92 Evaporative emissions system Check the EVAP system, purge flow problem detected (OBD-II).

Q.) are the 94-95 front bumper and grill interchangeable with the 96-97 w/o any modifications?
A.) YES THEY WILL BOTH FIT!!!!

Q.) Where do i find how to do a bunch of cool DIY stuff to my car?
A.) DIY God himself's page Cryogen97 or DIY forum

Q.) Is the H23 better than the H22 for boost?
A.) NO. The cr on an h23 is 9.8:1 and on the usdm h22a it is 10:1 (10.6:1 for jdm). CR shouldn't even be a factor. The h22a has a much better flowing head, and also has oil squirters in the block. Don't believe the hype - you CAN safely turbo higher compression motors (i.e. jdm h22a).

Q.) If I do this, will it be rice?
A.) Very good possibility, if you have to ask, dont do it.

Q.) I know nothing about HID, where can i find info?
A:) Check here HID do's and Dont's Very Very good info here

Q.) What size rims did my car come with stock?
A.) 94-97 EX = 15 inchers (alloys)
94-97 LX/DX = 14 or 15 inchers (steelies)

Q.) What size tires did my car come with stock?
A.) 94-97 LX/DX = 185/70R14
94-97 EX =195/60R15
95-97 LX/EX V6 = 205/60R15

[h22accord94]

Q:) What parts do i need for my auto to manual conversion?
A:) 1. 5 speed transmission (F22, F23, H22, H23)
2. 5 speed starter (90-02 Accord 92-02 Prelude)
3. 5 speed shifter assembly w/ shifter cables (90-97 Accord 92-96 Prelude)
4. 5 speed drivers side axle (your year accord, but from 5-spd version)
5. 5 speed intermediate shaft (your year accord, but from 5-spd version)
6. 5 speed clutch pedal assembly (90-97 Accord 92-96 Prelude)
7. 5 speed brake pedal arm (90-97 Accord 92-96 Prelude)
8. Clutch master cylinder w/ reservoir (90-97 Accord 92-96 Prelude)
9. Clutch line from Clutch master cylinder to clutch dampener (90-97 Accord 92-96 Prelude)
10. Clutch dampener assembly (90-97 Accord 92-96 Prelude)
11. Clutch line from Clutch dampener to 5 speed tranny (90-97 Accord 92-96 Prelude)
12. Clutch line from 5 speed tranny to slave cylinder (90-97 Accord 92-96 Prelude)
13. Slave cylinder (90-97 Accord 92-96 Prelude)
14. Clutch (90-02 Accord 92-01 Prelude)
15. Flywheel (90-02 Accord 92-01 Prelude)
16. 5 speed mount (Your year, 5-spd version)
17. 5 speed mount bracket (go to honda - tell them to look for the bracket that is welded on the car - part is S.O.P and costs 15-25.00) (see notes)
18. MIG WELDER (see notes)
19. BOLTS: 8 Flywheel Bolts, 6 Pressure Plate Bolts, 3 Intermediate Shaft Bolts, 1 Long Tranny Bolt
20. Recommended: HELMS Service Manual (www.helminc.com)

Q:) I want to put an h22 in my accord, wheres a good how to?
A:) Click Here

Q:) Where can I get JDM 1 piece headlights?
A:) JDM headlights for the 94-97 Accord are actually 2 piece but they are bolted together as one. If you want "real" one pieces, you'll have to use the headlights from the JDM 6th gen accord and custom fit them.

Q:) What is the Accords Stock Lug Pattern?
A:) 4x114.3

[h22accord94]

Check Engine Light on?
here are the codes thanks to GT4X's recent post

1 O2A - Oxygen sensor #1
2 O2B - Oxygen sensor #2
3 MAP - manifold absolute pressure sensor
4 CKP - crank position sensor
5 MAP - manifold absolute pressure sensor
6 ECT - water temperature sensor
7 TPS - throttle position sensor
8 TDC - top dead centre sensor
9 CYP - cylinder sensor
10 IAT - intake air temperature sensor
12 EGR - exhaust gas recirculation lift valve
13 BARO - atmospheric pressure sensor
14 IAC (EACV) - idle air control valve
15 Ignition output signal
16 Fuel injectors
17 VSS - speed sensor
19 Automatic transmission lockup control valve
20 Electrical load detector
21 VTEC spool solenoid valve
22 VTEC pressure valve
23 Knock sensor
30 Automatic transmission A signal
31 Automatic transmission B signal
36 traction control found on JDM ecu's
41 Primary oxygen sensor heater
43 Fuel supply system
45 Fuel system too rich or lean
48 LAF - lean air fuel sensor
54 CKF - crank fluctuation sensor
58 TDC sensor #2
61 Primary oxygen sensor
63 Secondary oxygen sensor
65 Secondary oxygen sensor heater
71 random misfire cylinder 1
72 random misfire cylinder 2
73 random misfire cylinder 3
74 random misfire cylinder 4