Need to know? This is the place.
Post your DIY/HOW TO requests here
Request for a DIY Retrofit on...
August 5th, 2010 09:54 PM
List of engines, codes, etc...
All Honda Engine Specs!
September 20th, 2009 01:16 PM
1986 - 1989
Turbo?
July 9th, 2008 11:49 PM
1990 - 1993
How To remove front rotors.
April 7th, 2010 05:02 PM
1994 - 1997
DIY: Blackhousing Headlights
June 28th, 2010 12:47 AM
1998 - 2002
HOW TO: Door Panel Removal
January 15th, 2007 06:56 PM
2003 +
DIY. Outlaw Engeneering...
June 14th, 2009 10:33 PM
Sticky Threads
AUTO-DETAILING For those that want to detail their own car & don’t quite know what to do, I am going to break it down for you. All in All, this takes about 4 hours. This is the process I used when I worked for a detail shop here in San Diego. Any car should be fully detailed every 6 months. ...
Accord Turbo FAQ and HOW-TO guide: By Accord R33 Iv seen many times on this board and other accord boards the question “What do I need to turbo my accord?” or “Turbo vs. Engine swap”. I’m going to give you a fairly quick and dirty crash course on the basics of turbo charging and what you need to...
DIY: Painting Wheels Whether you have a set of skanky old wheels you want to refinish, or you just want to change up your look a bit, giving your wheels a coat of paint is the way to do it. It’s easy, relatively cheap, and if you follow these steps it will last a long time. 1. Materials:...
Ok guys, I have had some suggestions for this section and I myself have been thinking about it for a while too... Well I tried something out tonight and well following the instructions didnt work so well, so if you submit a DIY tutorial, please be specific as possible... My example is below: I...
I already posted this in 5th gen but theres a lot more I didnt pay attention to. Heres all kinds of service manuals http://www.hondahookup.com/manuals/ FREE SHIT OWNS YOU! :rockon:
http://www.faqfarm.com/Q/FAQ/637
Please read and follow all rules posted below. Thank you. 1) All DIY & How To's threads must either have DIY: or HOW TO: in the threads title. Example: "DIY: Clearing taillights" 2) This is not the request forum so please DO NOT create new threads requesting a DIY/HOW TO. They will be deleted...
Found a forum that offers alot of help on body repair. http://www.a2zautoforums.com/forumdisplay.php?f=48
How To Reset SRS Light w/o Dealership How to hand polish aluminun engine parts How To Reprogram Your ECU for better gas mileage How To Install A Push Button Starter 9006 to 9005 conversion
Normal Threads
I bought new front and rear rotors and decided on the last rotor to take pictures and write up a DIY on the front rotor install. This is similar to the one posted in 4th gen but with more pics and more detail. This is also how I did it which in the long run was much easier and left little room for...
Ok, I'm in the process of sanding my 5th gen for paint (going from the stock dark blue to aurora blue used on Mazda3) and had intended on just taping off the door molding, door handles, mirrors and plastic trim along the bottom (front lip, side skirt, rear lip) But I'm looking at pictures of other...
Nothing really 2 explain as the package headlight restoration kit you buy has & tells you everything that you need. This is more of a "fact" type of thread to show everyone that it really works. On to the pics: How the headlight looked b4 the 1st step After 1st step of wet sanding w/...
whats up people. jus finished my drivers side window. unfortuntely didnt take any pics. but i still have to do the other side so stand by.
alright people i have my tanabes on the way but being that this the diy section does anyone have any pointers on a 97 coupe.
This DIY was done by ex-r-wagon from AWC forum
Voila! Borrowed from AWC site. Written by Kellen
This is my first DIY so let me know how I did. I did this a few months ago but a few LEDs burned out so I randomly decided to fix it and paint the board black to make it look better. I think the reason they burned was because I didnt use resistors.. I still didnt use them when I fixed them...
Found this awsome detailed DIY on HT that i thought would help some puzzled minds like mine http://www.honda-tech.com/showthread.php?t=1604753 The credit goes to wildoutwhitegsr on HT so thank him! Enjoy!
Didnt really want to make this a "How to" type of thing because it's so short, but i know some people can use this so........ Tools needed: Electrical tape, butt connectors (your choice) Wires (try to stay with the same size) 2 pin plug for tranny if one is not already installed I wont go...
Alright, so after hours of research, driving around to find the right parts and a little elbow grease I replaced all of my stock speakers with 6.5" Pioneers. WOW what a difference new speakers make. Anyways, here's a DIY for anyone else who's interested. Sorry in advance for the number of...
I am no way responsible for any damages or injuries caused by doing these modifications. WORK AT YOUR OWN RISK!!!! How To Reprogram Your ECU The purpose of this tech article is to show you how to reprogram the ECU to give you better gas mileage after an upgrade. After you get a...
Time for another one. Tools needed: Compression tester - $8 (got this @ harbor freight, local store) 10mm socket/ratchet for spark plug cover (DOHC only) Socket/ratchet w/ extension for spark plug removal a magnet to remove spark plugs (optional) an extra set of hands to turn the car over...
Part you are discussing:This DIY will save help not to buy the prelude bracket because the 5th Gen accords got longer throttle cable; therefore, you will need prelude cable but thanks to me I came up with this DIY to help you guys that have H22s with Accord stock Throttle Cable. My tools that I...
if no one appreciated then it ok...
There are currently 1 users browsing this forum. (0 members & 1 guests)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules